Car mount for Nexus 5 wireless charger

This is a fixture for using a nexus wireless charger as a dash mount for my Nexus 5 phone.
0
7
0
163
updated April 27, 2022

Description

PDF

This is a fixture for using a nexus wireless charger as a dash mount for my Nexus 5 phone. It is printed in two pieces which are fastened together using a screw (a little glue is also helpful). The ball socket works with many standard dash mounts (~17 mm ball). The tabs on the socket are designed to use a GoPro screw and nut. But, I did have to cut the GoPro screw a bit shorter.

I suggest printing the socket with 100% fill, so that it survives being pressed onto the ball. Also, print the socket with the cylinder section on the bottom, so you don't have to clean support material out of the socket.

The socket portion of this design was inspired by: http://www.thingiverse.com/thing:631379

Print instructions

Category: Mobile Phone Print Settings

Printer Brand: LulzBot

Printer: TAZ 5

Rafts: Doesn't Matter

Supports: Yes

Infill: 100% for the socket

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License