Sorry some of the photos aren't great. Camera's don't like transparent plastic.
This stand is an improved version of the dummy 13 stand by Soozafone. I didn't like how little weight it could hold, so I fixed it. This file may not work the greatest with infill and thick walls. The original file was 1 wall, no infill. This makes transparent filaments turn out really really clear. You can print in regular filament, I just recommend the same kind of infill and such (the base is really light). The base is much smaller to save time and filament, but requires aerial poses be above the base to prevent tipping. The base was printed at 2 walls, 50% infill. Everything was made in PETG.
It can be a little tricky to balance at times, but it always stays once balanced.
The “female” adapter file was designed for 90% scale with a 100% base, because that's how I printed mine. Take it or leave it.
Please don't sell this. If you use it in a video and make money off the video is totally fine, but putting out there for people to buy isn't. Designing files like this can be difficult, and I don't have a ton of time. If you are selling dummy 13, the base it comes with is probably the best way to go.
The author remixed this model.
This stand is designed to be stronger and hold dummy 13 better for poses not touching the ground. The other stand was too flimsy and unable to hold much weight, at least in transparent.