6 tools in 1 slim profile lock pick tools
Tips:
- 0.2mm layer height prints perfectly and maintains strength
- Print with part solid. About 5 walls or do 100% infill
- The spacer is small, use ARACHNE wall generator
- Use stiffer materials such as PLA, PLA-CF.
- ABS or PETG are more flexible, which is bad for printed lock picks.
Assembly Instruction:
- Place a 1mm thick tool on one end of the first rod
- Place a spacer (1mm thick too) on the end of the second rod
- Repeat until 6 tools and 6 spacers are used up
- Place Upper part on and screw nut
Tags
The author marked this model as their own original creation.