I designed this target popper for the novritsch targets. It has been designed so that when you hit it, it will fall over and mark that it has been shot. I have added an adjustable power bolt, so you can still get the targets to fall over if you use a weaker gun.
Link to targets: https://eu.novritsch.com/product/target-poppers-set-of-5/
Everything you need:
- 1 M3x30mm bolt & nut
- 2 M4x10mm bolt & nuts
- 2 neodymium magnets (8x4mm)
- 1 M5x15mm (longer if you have thick tables) hex bolt & nut
- 1 novritsch target
Assembly:
Start by pushing the magnets into place. Make sure to orientate them correctly, I recommend starting with the base and then the target arm. In case you oriented them wrong, punch the magnet in the target plate out from the front with a screwdriver and hammer.
Bolt the novritsch target and the target plate together with the 2 M4 bolts and nuts.
At last use the M3 bold and nut to screw the target plate and the base together.
If you wish to add a 3mm paracord string to the target you can do so.
It bolts onto any plank, table, etc. With the M5 bolt it locks into place.
Printed on a Prusa MK3s+ with CCTREE PLA+.
No need for support. The models are orientated the correct way when downloaded.
Print with 3+ walls and use 30-50% gyroid infill.
If you wish to print and sell the model, please contact me before you do so.
The author marked this model as their own original creation.