PS2 slim ribbon cable shield for SPU-3170

Shield to prevent bent ribbon cables from scratching discs (common fault on Playstation 2 slims).
Only compatible with laser model SPU-3170.
Needs to be glued to the laser assembly (the console needs to be opened in order to do so properly).
I used super glue/CA glue (be careful!). Not sure if double sided tape works too.


Printed on MK4S:
Prusament PETG
0,10 mm
100% Infill

Feedback is very welcome.
I'm still learning how to do stuff like this :)

DISCLAIMER: I'm not responsible if anything goes wrong or is damaged, including your PS2 or any discs. For me it works fine, but of course I can't guarantee that for you.