vesa 75 arm

Because I' m not allowed to make holes in the walls of my dorm, I made this arm so I could bolt to my wardrobe. 

The bolt holes are roughly 450mm apart.

All the wood beams and printed parts are connected with small 2.2x16mm screws.

Vesa 75 adapter and swivel plate are connected with small 2.2x16mm screws.

The hinges are connected with the M8 rod.

if u want to change the design:

https://cad.onshape.com/documents/c5b2763575a2e9ba51e80a1d/w/8c57af234830227c620239ec/e/15cf78e9aa8c7abde3cafe1c?renderMode=0&uiState=677c4e7f709744349b21b4ec

the design is kind off a mess, good luck😋

printed parts:

• 2x hinge 1.1
• 4x hinge 1.2
• 1x hinge 2.1
• 2x hinge 2.2
• 5x hinge 3.1
• 6x hinge 3.2
• 1x elbow 1
• 1x elbow 2
• 1x elbow 3
• 1x swivel plate
• 1x vesa 75 adapter

wood:

• 1x 45x20x385mm
• 1x 45x20x129mm
• 1x 45x20x418mm
• 3x 45x20x405mm*

*the length of these doesn't really matter, you just need at least 2 at the same length

hardware:

• 37x screw din7981 2.2x16mm
• M8 threaded rod
• 8x M8 (lock)nuts
• 8x M8 washer