Philipe Hue Dial Switch - Elegant magnetic stand

Minimalist, support free stand for Philips Hue Dial Switch.

Print without supports and insert 2 or 4 magnets (ideal size: 5mm X 8.5mm, shorter will do too). Magnets can be press fit. 

Rotate the inner printed part until it aligns. If it stays loose, use a couple drops of glue.

Model in pictures was printed with 0.8mm nozzle, 0.4mm layer height, scarf seams, Extrudr GreenTec Pro Carbon and used these magnets: link

Any material/layer height/nozzle size should work fine.