Wether you like to adjust your budget sim racing stand or just elevate a bar exactly 11cms above the ground, this is the model for you!
I designed this as the odd angle of my budget racing rig(Diwangus) forced me to either
which sucked a lot.
So, I decided to elevate the bar at the back, which allows me to finally achieve comfortable pedal distance and angle, while also keeping the steering wheel at a stable setting and comfortable distance. Also, as the raisers are allowed to spin freely, setting it up and folding are a breeze.
Assembly notes:
You should own some m3 and m5 screws and some nuts. THE RAISERS SHOULD BE ABLE TO SPIN FREELY IF YOU HAVE THE SAME STAND!
Print settings:
I just used PETG with two wall perimeters, 15% infill. Im using 100kg loadcell Pedals which dont even bother these raisers at all (so far). Might work with PLA but is untested.
Orientation:
P1 and P2 have holes which dont need support and should be printed with the holes horizontaly. P3 and p4 should also be printed with the holes horizontal. These parts might need support depending on your bridging capabilities. In doubt, just do it.
Notes:
Im not going to fullfill any requests for specific heights. Editing the STL is easy if you need something else besides 11cm or so.
The author marked this model as their own original creation.