Mandalorian HueForge
----
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 89.74x160mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Beige
At layer #15 (1.28mm) swap to Jade White
At layer #18 (1.52mm) swap to Red for the rest.
If you resize the model make sure you do NOT scale the Z axis
-----------
Please leave a rating or comment if you like the print!
Want to sell my prints? Commercial License is available here: https://patreon.com/asniaire
You can check out the rest of my designs here: https://www.printables.com/@asniaire_1422755
If you'd like to support my work, you can buy me a coffee :)
The author marked this model as their own original creation.