I made this model to add a “scratch barrier" that will protect your car paint when drying it off with your EGO blower, in case of an accidental bump.
Designed to fit SE3Dtech's EGO 580 CFM Leaf Blower Stubby Attachment https://www.printables.com/model/648293-ego-580-cfm-leaf-blower-stubby-attachment
(The Stubby attachment works on a 765 CFM blower too, as pictured)
Print the sleeve from TPU- I used a 95A TPU, though softer would probably be even better.
You can use less infill than I did, 5% Octagram Spiral or 15% Lightning would suffice. You might even be able to get away with 0% infill.
2 walls
0.4mm nozzle (though a bigger one will work fine)
0.2mm layer height.
Happy printing! :)
The author remixed this model.
Used the original model to design a sleeve that fits it perfectly.