Extended case feet for the O11D to promote airflow. 47mm tall, about twice as tall as the stock feet. Reuses the original (6x) fasteners and (4x) rubber feet.
Printed in ABS, .6mm nozzle, with no supports, with the case mating surface oriented on the print bed. I used a brim to reduce warping.
4 top / 4 bottom / 4 perimeters / 25% infill.
The author remixed this model.
I used the step file provided from LIAN-LI and used the sketch where the feet mount to the case as the base for my design. Thanks LIAN-LI!