MMU3 buffer with use of Prusas original wheels

I have med my acrylic glass 350mm high, instead of the 320mm that @LeifLumbyHenriksen used. It's up to you how hight you want them. the acryllic glass have the thicknes of 3mm. for other changes in the remix read whats different.

what I used is:

6 pcs, of acrylic glass by the size width=100mm, hight=350mm, thickness=3mm

2 pcs, of acrylic glass by the size width=93mm, hight=350mm, thickness=3mm

There is a need of 30 screws, perferly with round head and 5mm in length. It's good if they are at least 3.5mm thick. but it's up to you and what drill you are using. I used screws that was lying around.

A remix of @LeifLumbyHenriksen MMU3 buffer. My changes is with the idea that the base can hold a counter weight in the base. I didnt want to make new segement wheels so I reused the orignal ones. in the top I also made slots to hold the acrylic glass in place.The middle ring is from @LeifLumbyHenriksen MMU3 buffer. The original have 5mm screw holes, I scale downed the size to 3.5mm.