AtomRC Swordfish canopy

I wanted for my Swordfish to have FPV camera with maybe even an instrument panel. After a bit of tinkering, a couple of prints I came up with this.

The canopy is designed to be printed as one piece, I used 1wall with 5 - 8 % infill. 
It allows for 4s1p 21700 pack in the nose part and made me add about 10g in the tail to compensate. 

The holes are for GM3  / C20T gimbal and I also added a servo hole if someone wants to only use a simple servo for panning. 

I include STLs and STEP files if anyone wants to tweak the design. 

Prints without supports if placed on the back side if your printer is dialled in properly. 

Glued together both pieces and used as a base to carve and redraw my ideas.