Tricolor Monstera Variegata

This is a tricolor remake of a monstera variegata.

It's made with hueforge. You can use other green as well

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 163.76x200mm in size
You may print at higher layer heights below the Min Depth of 0.28mm
The Max Depth is 1.3mm and the Actual Depth is 1.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA  avocado green  Distance: 1.3
PLA  White Transmission Distance: 3

This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.44mm) swap to geen
At layer #19 (0.88mm) swap white for the rest.