4 inch Dust Port - Delta ShopMaster Jointer

This part is designed to adapt a 4 inch dust collection hose to the Delta ShopMaster Jointer.

OD of the dust port is 3.935" which fits a standard 4" hose. 

No additional hardware is needed. Use the 4 screws on the jointer to attach the flange. 

My Print Settings

• Filament: PETG
• Wall Loops: 3-4 recommended
• Nozzle: 0.6 mm
• Infill: 20% - Gyroid

Additional note: There is no specific purpose to the multicolored print in the photos. I ran out of black filament!