This is a slight remix of Clerx's wonderful Boeing 747SP model that adds landing gear in place of the stand since I personally think it looks better that way.
I know that the main gear is not super accurate, but who's gonna notice?
Modifying Objects
IMPORTANT: You must add holes into the fuselage sections where the landing gear should slot. To do this, right-click on the fuselage, select add negative volume, then choose ‘cylinder’. The diameter of each cylinder should be 3mm. Refer to the cover photo for placement. Alternatively, you can use the included .3mf file.
Once you print the model, you only need a little super glue to attach the wheels. If you try to attach the wheels without adding holes, it will be uneven.
Print Settings
Print without supports and if desired, with a brim. I would recommend setting the infill percentage to at least 60% for the landing gear and 5% for the fuselage.
Other
If you found this model useful, please give it a like, as it really helps me out.
The author marked this model as their own original creation.