Hard Case for Abrasive cut-off wheels 125mm

...to store all discs more securely
1
14
0
40
updated January 6, 2025

Description

PDF

I was looking for a way to store the cutting discs in the case of the power cutter so that they don't accidentally break or get damaged in any other way. I have an old case where the cut-off machine is ‘inside’ between the discs. I know it's not ideal, but that's just the way it is.

So I have developed a small box that fits a few discs inside, which is relatively stable and keeps tight. I also added 2 bulges to make it easier to get the discs out.

So that you can get the pressed together halves apart again, I planned a few lugs for the bottom part so that you can open the thing with force.

Printed in just under 5 hours in PETG with 10% infill.

✄ - - - - - - - - - - - - - - - - ✄

Ich suchte nach einer Möglichkeit im Koffer des Trennschleifers die Trennscheiben so zu lagern das sie nicht ausversehen zerbrechen oder anderweitig beschädigt werden. Ich habe einen alten Koffer wo der Trennschleifer so "drinnen" zwischen den Scheiben liegt. Ich weiss, ist nicht optimal, aber es ist halt so.

Also habe ich eine kleine Schachtel entwickelt wo so einige Scheiben rein passen, die relativ Stabil ist und dicht hält. Weiterhin habe ich 2 Ausbuchtungen hinzu gefügt damit man die Scheiben einfacher raus kriegt.

Damit man die aneinander gepressten hälften wieder gut auseinander bekommt habe ich am Unterteil noch ein paar Nasen dazu geplant, so kann man das Ding mit Kraft öffnen.

Gedruckt in knapp 5 Stunden in PETG mit 10% Infill.
 

Tags



Model origin

The author marked this model as their own original creation.

License