PFAF Passport sewing machine tray

This is very simple tray to fit PFAF Passport 3.0 (should fit also 2.0) sewing machine.

Warning It is longer that typical printer can print. It is 30cm long. If you need smaller, feel free to import in fusion 360. File is included. Or you can cut and glue it.

Feel free to remix and improve. f3d and step files are included.

This is not a mechanical part so it doesn't matter settings like infill, etc. but you need to have a big print bed at least 30cm (maybe you can rotate it diagonaly and use smaller bed)

I printed it with:

• printer: custom Hevort CoreXY 300x290
• skirt: 0 (as it is so big)
• walls: 3
• layer 0.2
• infill 15% grid
• White PLA