xTool S1 to Fumeclear FC-2003 exhaust adapter

This part is designed to take the exhaust from the xTool S1 and feed the fumes into a Fumeclear FC-2003.  This silcone adapter works but I wanted to short the run for the exhaust, so this part allows for that.  

This may work for other Fumeclear parts or can easily be remixed to fit other adapters.  

The S1 side of the adapter has a 90mm inside diameter.  The Fumeclear side has a 66mm outside diameter. 

This was designed with TPU in mind as the material and works well with that. 

xTool S1 - https://www.xtool.com/products/xtool-s1-laser-cutter

The Fumeclear extractor - https://www.fumeclear.com/products/fumeclear%C2%AE-fc-2003-fume-extractor-194cfm

Enjoy!