Floater Planter with plate

Minimalist planter design made of several torus with variable diameter.

It is sized for the A1 mini.

Inner diameter of full scale model (olive green in the photos) is 120mm, which together with height of 118mm gives you around 1.3L of volume.
Scaling it down to 90% (gray in the pictures) results in approx. 0.9L of volume.

Printed with generic PLA:

• 0.4mm nozzle
• 0.2mm layer height
• 7% gyroid infill (planter) and 15% (plate)
• 3 walls
  
  Note: all photos are actual printed model and are copyright protected