A1 MINI USERS - THE MODEL IS SCALED BEYOND YOUR PRINTERS PRINT HEIGHT, PLEASE USE YOUR COMPUTER TO SCALE THE MODEL DOWN AND DO NOT PRINT STRAIGHT FROM THE APP.
Do you have little ones around or get things stuck in the notches on the rack corners? If so, this cover takes care of stuff not getting caught in the holes. I went through a couple different variations before settling on this one. Its measured around the muscle rack from home depot but can be scaled in the X and Y for smaller or larger racks. I was able to print it standing straight up which is how I have it in here using a strong tree support on one of the sides to keep it from possibly falling over when it gets to the top. Also have a big brim on it as well. Printed in PLA but could be printed in whichever filament you find necessary to use. Print height is 196.8 based on my specific scenario. 3mf file has the inner wall decreased from .45 to .42. Will need to use a computer to change that back if you would like/need to.
The author marked this model as their own original creation.