BLTouch mount for Longer lk4 pro / Alfawise U30

This is a pretty sturdy mount for your BLThouch and require no modification on the printer,
for mounting it you'll need 3 M3 screws with a lenght between 8 and 11 mm.
For mounting the blthouch I used the 2 M2,5x16 bolt that came whith the sensor.

The sensor offset position to the nozzle are X -40 Y -9 and Z -1.5 when fully retracted

The SM variant of the file need to be mounted with the bolt that hold the roller, the lenght of the original bolt should be enough

Print Settings

Printer:

Longer lk4 pro

Rafts:

No

**Supports:** Yes

Resolution:

0.2

**Infill:** 50 Filament: Sunlu ABS

Notes:

I suggest printing this with some material more resistent to temperature than PLA like ABS or PETG

Post-Printing =============

Category: 3D Printer Parts