Frame for standing table clock without bottom arch

If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament and the transition between colors looks ugly, here is the perfect rescue.

Model is supportless. It is very easy to print. 

Don't forget to degrease the print bed thoroughly.

The assembly itself takes no more than one minute.

The entire frame is in one piece. If the printer is properly adjusted, it can just snap together and no glue is needed. Otherwise, you can just secure it with glue or double-sided tape.

I made a frame for a cleaner look.