X-Shot Longshot Modified Short Dart Mag Release with Knurled Knob

This remix includes 3 main changes:

The knob is now a knurled round knob that takes an M3x25 socket head screw, and should be printed at 0.1mm layer heights or lower in order to resolve the knurls. The knob includes sacrificial bridging in the screw hole, so please be aware of that.

The slide now has a tear drop hole for the M3 screws to thread into as the original would leave flat topped holes, and the spring knub has had its underside adjusted for less post processing.

The slide now includes predesigned supports with a 0.4mm clearance. If you are printing in PET-G, then this should work pretty well and leave a good bottom finish on the slide. 

I redesigned the knob to be a more standard knob with knurling which takes an M3x25 socket head screw, as well as adjusting the screw hole on the slide component, adjusting the underside of its spring knub, and I designed included supports. 

Hats off to the original creator, their excellently designed step files made this remix a breeze.