You Should Have Kept Your Mouth Shut - Tim Dillion Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 169.41x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Start with Black
At layer #6 (0.56mm) swap to Sea Green
At layer #9 (0.8mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.
At layer #24 (2.00mm) swap to Bone White for the rest.

I wish them well.