(V2) Nerf Motoblitz Extended Mag Releases and Replacements - Assembly Required

This is a drop-in replacement for the stock mag release on the Nerf Motoblitz. The file list consists of:

• A replacement mag release (If you broke the original one or if you lost it somehow).
• An extended mag release, adds about 2 cm more of contact to the mag release. 
• A straight version of the mag release (I don't know why you would use this, if you make this any longer the mag release may interfere with the magazine and cause the mag release to not fully release the mag.)
• A spring guide that will be inserted into the mag release's recessed hole.

All files are also available as a .step file if you want to modify the files further.

Brims are recommended for both parts. The spring guide should be printed straight up with the fillet facing up. All parts are preoriented and are optimized to be printed in their orientations. 

The flared magwell made by me in the second picture can be found here.

This is a variation of my own model.

Main changes:

• Model is now printed on its side, should minimize supports needed.
• Spring guide is now a separate part and needs to be inserted into the recessed hole in the mag release.