Dragon Ball Z - Freezer HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Matte Marine Blue Transmission Distance: 2
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #3 (0.32mm) swap to Marine Blue
    At layer #12 (1.04mm) swap to Beige
    At layer #18 (1.52mm) swap to Jade White for the rest.
 

If you resize the model make sure you do NOT scale the Z axis

-----------

Please leave a rating or comment if you like the print!

Want to sell my prints? Commercial License is available here: https://patreon.com/asniaire

You can check out the rest of my designs here: https://www.printables.com/@asniaire_1422755

If you'd like to support my work, you can buy me a coffee :)