6mm_XL_Rounded_PolyTube_Clip
I swapped 6mm polytubes for the standard 2mm tubes to reduce friction. Eliminated failed prints with certain filaments
0
3
0
30
updated January 4, 2025
Summary
PDFI swapped 6mm polytubes for the standard 2mm tubes to reduce friction. Eliminated failed prints with certain filaments
Model origin
The author remixed this model.
Differences of the remix compared to the original
The 2mm clip-side was increased in size to support a 6mm tube. I added a slight void in the hinge area to reduce plastic stress when clip is being bent during installation. The 6mm tube is more easily sourced than other sizes, and the 2mm tube will fit inside of the 6mm tube if so desired to create other connections (like around the filament detector).