cradle of filth hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x102.84mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #12 (1.04mm) swap to BambuLab Green
At layer #16 (1.36mm) swap to Jade White for the rest.