Adding Supplies
Print Settings:
Filament | PLA, PETG |
Layer Height | 0.2 mm or less |
Wall loops | at least 3 |
Infill | 20%, grid |
Top\Bottom shell | 3 |
Supports | None |
Brim | As needed (depends on bed adhesion) |
Assembly guide:
Step 1:
Gently bend the contacts into the hook shape of the LED strip and insert it into the lock.
Step 2:
Insert the lock into the top lid.
Step 3:
Check the operation of the LED strip.
Step 4:
Connect the top lid, table and multiplier bar.
Step 5:
At the bottom, hook the LED ribbon with a hook.
Step 6:
Thread the hook through the bottom lid and join everything together, you can drop a little glue if necessary. After that, cut off the excess part of the hook.
Done!
The author marked this model as their own original creation.