The MKD003 is a bit smaller than the MKD002 so I changed the dimensions. Also, I had some trouble printing the connector part with a bigger nozzle (0.8 mm), so I made that a separate part I printed with a 0.4 mm nozzle.
The 55mm version is just a tad too small to nicely fit a spool with a width of +/-58mm, so I'd recommend using the 80mm if you want to dry those.
The author remixed this model.
The MKD003 is a bit smaller than the MKD002 so I changed the dimensions. Also, I had some trouble printing the connector part with a bigger nozzle (0.8 mm), so I made that a separate part I printed with a 0.4 mm nozzle