ProtoXtruder Back plate mount for HGX-lite gear kit (Back_HGX.stl)

I wanted something compatible with my Voron 0.1, as I had cables already pulled, and crimped.  I am not ready to convert it over to the newer carriage for the V0.2.

I used the supplied design files from nhchiu@nhchiu and used the same style of support to create horizontal mounts for EBB36, or cable managements.

Files:
-BackBoardMount6mm.stl
-BackBoardMount7mm.stl
-Spacer20mm.stl (vary the z height for your needs)

Required
2 x M3 heatset inserts either 5mm or 6mm deep depending on the model printed.

Changed the following part Back_HGX.stl by added mounting points for a EBB36, or cable management that use the horizontal position for the motor.