Stealthburner MicroProbe

This is a mount for the Voron Legacy to Stealthburner toolhead mount for use with a Biqu Microprobe.

2pc m2.5 self tap into the print. will probably modify later to take heatsets and reprint from ABS. I will update this with that option later. 

Id recommend the typical Voron print settings(4walls min 40% infill) and to be ABS as its down by the hot bed. This is PETG for a test but has worked for a week during calibration. 

Probe offsets

x: -2.28

y: -20.92