Wall Mount for Park Tool PCS 10.3 Repair Stand

You can use this to store your Park Tool PCS 10.3 repair stand (and likely other Park Tool stands with a similar head shape) on the wall.

I couldn’t find anything like this on the market, so I designed one myself. The back panel is tilted to provide adequate clearance between the wall and the stand. The design is optimized for use with M8 countersunk screws.

For best results, this should be printed on its side to maximize strength. I printed mine using Prusament PC Blend Carbon Fiber (PCCF) with 4 walls and 25% gyroid infill, but other tough materials may also work. Keep in mind that the choice of material and print settings will significantly impact the part’s strength and durability. Be sure to adjust and test your settings accordingly.

Disclaimer

This part is designed for specific use cases and has not been rigorously tested for all applications or materials. If you choose to use or print this part, it is your responsibility to ensure it meets your strength and safety requirements.

I am not liable for any damage, injury, or failure caused by the use of this part, inappropriate material selection, or improper printing practices.

Always thoroughly test the strength of the printed part before using it to store or support heavy or valuable items. Use at your own risk.