Camera Mount for Prusa MK3/4/4S with Cable management features

Printed part settings:

0.2mm layer height.
Nozzle size 0.4mm.
Infill 15%.

Brim might be required for thin “Claw” feature as mine peeled up on the first print attempt. I just squished the part into the bed slightly more than normal to get around this issue.

Attach the camera first. Camera mounting you can use a ¼" bolt that will screw through the printed bracket at into the camera as seen in the pictures. 

Bracket attaches to the aluminium extrusion at the front of the printer as seen by JSund's pictures of the original model. 

Added cable channel and mounting points for zip-ties for cleaner aesthetic. A version exists by JSund that have clips for the cable but I was not a fan of that so did this instead.