SpeedyBee Mario5 Low Profile 18x18mm GPS mount

Orientation of the Walksnail M181 will be CW0FLIP in betaflight for correct compass orientation. Make sure to follow Betaflight's magnetometer calibration before flight to ensure GPS is set up properly.
 

No extension:

Won't have the extra lip in front to protect the camera. 

With extension:

Has extra lip to protect the camera. I recommend that this version be printed if you run the Moonlight as the ND filter will stick out quite a bit. At max angle the piece will not bee seen in the goggles. Also made a chin guard that sticks out just a bit more to protect the camera from harsh landings. 

Printing:
Print with supports at 10% gyroid infill 5 layer walls. Rotate part like the image. Use regular supports and not tree. Scale down chin guard to 10% original size. 

Mounting:

Easier to mount before its screwed down as you can kinda bend the part to allow the GPS module to slide in better. Make sure GPS wires are twisted.