Mountbox for 3 in 1 Charging Station (Phone, Watch, Earbud Case) for Skadis

I created a Custom Mountbox / Shelf for the 3in1 Charger Station seen on the Picture (158x96), it has a hole in the back floor for a USB Cable to go through. 

Of course you can also use it for whatever else you want.

I Printed it without bottom and top layers so that the Infill pattern is visible, saves Infill and looks cool.

You will need a Backplate with Hooks for the Mount, grab one from my collection of Universal Mounts here:

https://www.printables.com/model/1129157-skadis-universal-mount-collection-1-to-8-hooks-hor

My recommendation is a mount with at least 4 Hooks. Just Print one and glue it on the back of the Charger Station Mount.

My Settings:

Layer Height 0,2

Walls / Perimeter 5

Top and Bottom Layer 0

Sparse Infill 40%

Infill Pattern Honeycomb

Infill / Wall Overlap 30%

No Support

Enjoy