Prusa XL Tapo Camera Mount

Tapo Camera Mount
A custom Tapo Camera mount designed for 20x20 mm aluminum extrusions (V-slot rails), originally designed for the Prusa XL but may of course be used on any similar rail. 

Compatible Camera Models:

• C200 / C210 / C211 / C220
• TC70 / TC71
• Any other camera with a similar mount type (or use it for anything else that fits).

Features:

• Easy to print
• Easy to install
• Compatible with the EnXLosure, made by Voxel3D

Suggested Print Settings:

• Material: PETG
• Infill: 15% (Gyroid infill preferred)
• Printing Orientation: Four screw holes facing down
• Supports: Yes, required for the small shelves

Assembly Instructions:

1. Attach the original Tapo mount to the printed mount using the original screws. (Drill the holes if needed for alternative screws. The holes in the model are 3 x 40 mm)
2. Insert two 12 mm hex screws (10 mm may also work) into the mount holes. Add a shim for each screw if available.
3. Attach drop-in nuts (printable drop-in nut) to the screws
4. Secure the mount to the aluminum frame.
5. Install the camera onto the mount.
6. Done!

Let me know if you’d like further adjustments.