Nozzle tool 1/4in (6.35mm) socket

I wanted a dedicated nozzle tool that fits 1/4in sockets, so i made one.

This should not be printed in PLA as it will melt. 

ASA, PETG is recommended.

The dimensions are on the large size to compensate ASA/ABS shrinkage (about 0.2mm larger) but it might still be a very tight fit. I printed mine in ASA-CF but i had to use a hammer to get the socket all the way in. Ordinary ASA would be a better fit.

Takes aprox 40min to print.