Filament dry storage adapter for Kichly Storage (2024)

Store your hygroscopic filaments. Holds a good amount of dessicant and either a rectangular or circular hygrometer.
17
111
3
620
updated November 11, 2025

Description

PDF

NOTE 2025-11: As of early 2025 the boxes being sold on Amazon appear to have slightly tweaked the design, meaning these are no longer a snug fit but don't fit. I now have some of these boxes myself, so will try to adjust the design soon. See the comments where @beachview_542634 has invested the effort to verify which edition you have.

Hygrometer holder snaps onto the front of the dessicate box, holding in the lid.

Wanted a snug fit to the bottom of these (Amazon UK) Kichly cereal storage containers.

Printing:

  • PLA is fine.
  • Print with no brim and arachne walls.
  • Print Hygrometer holders back down.
  • The front tabs of the dessicant box needs support - Ideally with a zero-distance support filament (e.g. explicit support filament, PETG if main body is PLA etc). It works with normal supports but the fit to the hygrometer holder is a lot more generous when these are supported properly.
  • For the dessicant box, printing infill first on at least the first 0.9mm makes the filleted base come out a lot cleaner.

 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more