Baseplate for Snoopy by reddadsteve

I made this model because I printed two of redadsteve's amazing Snoopy's as Christmas giveaway and I was kinda missing a baseplate for a proper display.

I made a recess into the base plate so the house can be easily positioned and glued in place with CA or any other plastic glue.

Can be printed in two tone, just add a color change at 4.2mm layer height or import the provided 3mf as project, there's everything set and ready to print, once you configured the filament you want to use.

Printed in Prusament Galaxy Black and Simply Green PLA

0.2 layer height

seam position Rear

15% ZigZag infill

color change at 4.2mm layer height

Add on for the original model by reddadsteve