Bic Lighter Case with tamper and stoker

wanted to print this case to test all of my sample coils so i reduced it to under 5m and added a few things i wanted too
6
40
0
184
updated January 2, 2025

Description

PDF

very strong design doesnt need really any infill

i just print with default settings + brim and that = 4.90m 

If you've got 4 meter coils you can remove the raft and print with 2 premeters and 5% infil and it is still pretty strong. 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

ADDED :

  • RAFT
  • STOKER HOLE
  • HEX BIT HOLE 
  • FLATTEND SIDE (REMOVED TEXT)

    i really like this design its super strong and fits the lighter well, so i wanted to add a stoker and hex head like a zokerstoker 

    i had trouble printing many as the bottom is so small and the auto generated raft wasn't suitable so i just put my own in
    you can pull it below the bed if your bed has better adhesion than mine.
     
    i put some holes in the original case so it can be printed with the little sample coils you get
    4.90m of filament needed to print

    i also added a hole for some metal wire used a stoker/toker and added a hexagon cut out that fits hex bits, you could use as a tamper for your pipe or use it as a makeshift screwdriver (maybe)

    and also removed the text as i like to use prusaslicer to write random stuff on the flatside using the text tool

License