Bubble Hockey Puck

Thanks for looking!   We needed some pucks for Bubble Hockey, but didnt have any on hand, so I made this as close as I could.

PETG and overhangs on my MK4s required supports on a 0.4mm nozzle.  You can see a few of my failures in the pictures.  It will print better in PLA, still needs supports.  

After trial and error I used a 0.8mm nozzle and some gold silk PLA.  Worked great!  Looks good, more importantly, it plays well on the table!  

Recommend:

0.6mm or higher.

Supports

70-80% infill (this got the weight close to original)

PLA - Cooler colors are better!