Dewalt DCS565 Circular saw to 1-7/8 inch hose

An adapter for the Dewalt DCS565 20-Volt MAX 6-½" circular saw dust collector to connect to any 1-7/8 inch shop vac hose! I couldn't seem to find this adapter anywhere else and didn't want to sink the money into getting the Dewalt adapter and splicing it onto a new vac hose. 

It's a snug fit on the vac side. But on the saw side, I put a strip of 1" gaff tape on the inside of the adapter for a very tight fit so that you can pull the vac out without pulling the whole adapter away. This is a necessary step as I made the adapter slightly oversized to allow for the strip of tape.

If you want to design something for this adapter, the 1-7/8" hose is 45mm wide, and the saw-side is 43.5mm with tape, probably just 43mm without tape.

Printed with standard fuzzy skin settings for better grip.

Printer: P1S

Filament: Creality Ender PLA+

Wall Loops: 3

Infill: 15% Grid. Only 9 layers of infill total!

Fuzzy skin: 0.8mm point distance, 0.3mm thickness.