Awesomatix A800R 30mm Fan Duct/Mount

This is a model to mount the 1UP fan on Awesomatix A800Rs.  The local hobby shop was out of other fans when I built mine up and the 1UP fan seemed like a nice clean and tidy fan, not to mention they seem to make an extensive selection of A800R parts, so why not support them.  .  Modeled to be snug up against the motor, but that causes issues with fans, so bypass ports are included to prevent fan stall depending on rotor position in the motor.   The Fantom is 36mm in diameter, which should be very similar to others.

Provides PLENTY of cooling for my 21.5T Fantom Helix v2.  Comes off the track feeling and looking cool.  

Printed mine in Prusament PC Blend Carbon Fiber https://prusament.com/materials/prusament-pc-blend-carbon-fiber/ though other filaments like PETG should be plenty sufficient.  Mine was printed with a 0.6 nozzle on my XL, but would recommend using a 0.4 for best quality.  I printed mine at 100% infill.

Mount holes are sized to use the 1UP supplied M3 mounting bolts with no inserts or threading.  Just push a bit while screwing in and form your own threads.  Plenty strong for holding the fan on during  high speed cartwheels and straight-on wall crashes, as me how I know.  

Mounts with 1 M3x10 BHCS that should be extra from your kit.  SHCS will work as well, but will protrude a bit in to the ducting.  

Wiring in pics is in work :) Still sorting the rest of the car out.