Calamity Toolhead EBB36 Mount

This is an EBB36 mount for the Calamity Toolhead. This also allows you to run a toolboard while using the Calamity toolhead. 

If using in an enclosure, make sure you print this out of something like ABS or ASA!

Print Settings

• Infill: 40%
• Walls: 5
• Bottom/Top: 5

Hardware

• 2x M3 (short) heat set inserts
• 2x M3x35 screw

If you need help setting up the Calamity toolhead, or moving to a Chube Air or LGX Lite Pro, my Klipper configs for my Doomcube are here (updated nightly): 

• Entire Repo: https://github.com/matthewj301/doomcube/tree/main
• Calamity Toolhead Portion: https://github.com/matthewj301/doomcube/blob/83ce2610adc1e311a02a6e47a5709a5859ae48d0/custom/toolheads/calamity.cfg

Happy printing!

Used the Calamity toolhead CAD model to design this EBB36 mount so that it is snug and connects well to the main plate.