WOODWERD Festool CXS MFT CADDY

WOODWERD CXS CADDY is great for keeping your CXS 12 out of the way while right at a hand's reach.

The build has 4 parts.  Print in a vertical orientation and select snug normal support.

Parts are:

CXS-MAIN (Main body)

CXS-Shelf (Stabilizer arm)

2x MFT T-Nut (From Festool)

Build Process

1. Print parts ideally in a PETG or stronger materials.
2. Heat set 4x M3 inserts into the Shelf part.
3. Screw on 4 Keilverbinder Single connectors with M3 Screws
4. Slide the shelf into the Main body and lock it into place
5. Install MFT TNuts with M5 Bolts and Nuts through Main body arm holes
6. Slide assembly onto MFT table rail
7. Tighten MFT Nuts in position

Other Parts needed:

4 Keilverbinder Single Connector (from Shaper) [LINK]

4 M3 Heat Set Inserters [SAMPLE]

4 M3 Screws [SAMPLE]

2 M5 Bolts [SAMPLE]

2M5 Nuts [SAMPLE]

Additional Options:

If you want to have the Centrotec holder for use with Caddy and for use on the belt download it from the link HERE

You can watch exploded assembly views here:

EXPLODED