DH98 Mosquito Lithophane Lampshade

Lithophane lampshade of a DH98 Mosquito in flight.  Specifically KA114 flying over New Zealand.  I modified the photo from Bob Leask and replaced the sky with one that tiled and was better suited to be used as a lithophane and so there was no seam on the lamp.

I used this lamp but any that are E26/E27 with a screw style lampshade holder should work just fine.  I printed mine out of Sunlu white PETG which pairs well with a 2700k lamp to get a nice sepia tone in person.

Print Settings:  0.4mm Nozzle, 0.1mm layer height, 8 walls(purposefully over the thickness of the model to ensure it is solid), 0 top and bottom layers, support painted under the ring that interfaces to the lamp.