Foot for Kensington keyboard

Snap out foot for Kensington keyboard model M01396-K. May fit other models.

The original foot is on the left in the cover photo.

2 models available: 

• R1 (center) will require supports but is closer to the original.
• R2 (right) does not require supports, but is a little thinner.

It's a quick print, 4 feet took less than half an hour and used under 2 m of filament. (PET-G in my case).

If you make it, please post and rate.

If you have trouble with it, let me know.