AIS for Toyota GR Yaris

UPDATE: I have reduced the Height of the AIS Mount about 10mm

Alternative Air Intake System for Toyota GR Yaris - and maybe the Facelift.

https://youtu.be/Gia9_DREhcA

With it you will get lower Air Intake Temperatures (CACT) and  appr. 16 HP more Power
with a Software Modification like a ECU Remap or a Tuning Box.

Print it in PETG for normal Street Use or in ABS for use on Tracks. 
Cutted Parts for small 3D Printer (256x256x256) and
uncutted Parts for big Printers (300x300x400) also available.

I have glued the cutted Parts with: https://www.amazon.co.uk/Liquid-extra-strong-weld-accessories-Universally/dp/B0DCP2S315/ref=sr_1_1

You need to fix the AIS Mount with two big Cable Ties and 
two Pieces of self-adhesive Velcro Tape 50x100mm or similar 
to connect the two Main Parts together.

Don't forget to CLOSE the Vacuum Hose coming from the FLAP or you will get Power loss and Error Messages. 
Carefully remove the MAF Sensor from your Stock Air Intake Box and don't loose the two tiny Screws - you need it to fix the MAF Sensor on your new AIS.

For some Help get a look here:  https://photos.app.goo.gl/SeftXo7VoTbwBNDBA